Product pages are organised by industry chain rather than by catalogue, because the sourcing logic differs between categories: a hydraulic cylinder, a porcelain dinner set and a canned bamboo shoot require entirely different due diligence. Each page states what buyers typically source, the sourcing points that matter and the documentation to expect.
What this section contains
- Thirteen category pages aligned with the twelve chains plus a supplementary category
- What buyers typically source in each category
- Sourcing notes on specification, MOQ and configuration
- Quality, compliance and documentation requirements
- How to send an inquiry that produces a comparable quotation
How to use it
Read the category page before contacting suppliers. A specification written against the sourcing notes on these pages usually produces quotations that can be compared directly, which shortens the sourcing cycle considerably.
Sub sections
Latest entries
Carbon-steel Diamond Wire
Electroplated diamond wire on high-strength carbon steel, 26–550 µm, the workhorse for PV multi-wire slicing.
Tungsten-core Diamond Wire
High-strength tungsten core, 24–30 µm, for lower kerf loss in thinner and larger PV wafers.
Loop Diamond Wire
Closed-loop diamond wire for squaring and cropping silicon ingots, semiconductor cutting and precious stone.
Tungsten Wire Rope
Multi-strand fine tungsten wire rope for crystal-growing furnace pulling systems: strong, low elongation, heat resistant.
High-purity Quartz Sand
Crucible feedstock for the crystalline-silicon chain; trace elements and particle size drive crucible life and wafer yield.
Graphite Composite Bipolar Plate
Conductive separator for fuel cell and flow battery stacks, combining conductivity, corrosion resistance and gas tightness.
Ultra-fine Tungsten Wire and Robot Tendon Rope
In-house ultra-fine tungsten wire down to 0.005 mm, base material for bio-inspired tendon rope in humanoid and surgical robots.
Metal Fiber
Bundle-drawn metal fiber, 1–100 µm, seven alloy families, capacity above 500 t/yr.
Sintered Metal Fiber Felt
Air-laid and vacuum-sintered multilayer filter medium: stainless, FeCrAl (900 °C) and titanium grades, sheet or roll.
Conductive Masterbatch
Ultra-fine stainless fiber as conductive phase at 60% and 75% loading, for anti-static, EMI shielding and semi-conductive compounds.
Composite Thread and Conductive Yarn
Composite thread, conductive blended yarn, stretch-broken tow (38–110 mm, 2–10 g/m) and blended tow for heating and anti-static textiles.
Cast Bimetal Parts
Cast liners, bucket teeth, edge shrouds and corner heel shrouds, with single-pour capacity above 10 tonnes.